Download Software
Before downloading software, for older browsers make sure your browser File Types or
MIME settings for "exe" and "w02"
file types are set to application/octet-stream or application/x-msdownload
in order not to automatically try to execute these files. When a dialog box appears,
select Save As and select the directory to which you want the file saved,
then run (double click) this file. This will start the setup program. An option is
provided to download the software on 2 files so that it may fit on diskettes to port the
software to another PC. All the files needed for installing the software are included in
the packed file(s) and the installation program will prompt you through the install.
CATV Equipment Control Program
Release V4.3 for 16 bit Operating Systems (No longer enhanced)
See Download
latest 32 bit version for most currently maintained software
Note: This
Revision (Rev. 4) posted 01/29/99, contains corrections to problems when leveling with the
HP 8560E spectrum analyzer, and when increasing the number of channels in the
configuration files through the System Setup screen.
Highlights of Features recently
added in Versions 4.1 thru 4.3
- Support for Rohde & Schwarz FSE spectrum analyzers (V4.3)
- Important software corrections - see Version 4.3 Changes
- Select and control multiple channels simultaneously
- Redesigned or repositioned controls on all forms for easier and more
consistent navigation
- Capability to configure multiple frequency plans through use of a
newly designed system setup screen, and to specify loading of leveling data automatically
when a plan is selected
- Option to override automatic attenuator setting to use preset value to
allow leveling to different levels over many frequency segments
- Attenuator setting saved and restored together with leveling data
- PC resident user script capability to control spectrum analyzer, make
calculations and store results for distortion measurement
|
 |
(Review Version Changes).
This software can be installed in a separate directory from your existing software. Version 4.3 Software User Manual.
For upgrading from an earlier version just copy your USER.INI and other
configuration files you currently use for your generator, into the directory you
install this software.
Download Version 4.3 as
a single file, then open (double click) this file to have the system installed. The file
is named MCTV43.EXE (Size: Approx. 2.6 MB) by default.
Please Note: See advice about setting your browser's
"Helpers" or "MIME" type settings for w02 file types
at the top of this page. Download as two separate disk files: diskette1 (contains setup.exe)
and diskette2 (contains
Setup.w02) then open the setup.exe file to install the system.
DTS Distortion Test System Control Software
The DTS software allows interconnecting various components with only a click or
two of your pointing device on a block diagram representation of the system. This software
is custom designed for a specific hardware configuration. See a brief overview of a typical system.
More information on the Distortion Test System and Automated
Distortion Characterization software is available under the Custom Software link on the
Home page.
As of May 18, 1999
