MODEL SX-16C

MULTIPLE FREQUENCY SIGNAL GENERATOR

 

To view/print this product sheet in Acrobat Reader PDF format click here.

The Model SX-16C provides clean, modulated and unmodulated, crystal-controlled, amplitude-variable outputs, up to +57 dBmV per channel. The model SX-16C is an improved version of the SX-16 using enhanced technology and provides carriers that can be adjusted over a linear range of 15 dB.

Picture of SX-16B Frequency Generator

SPECIFICATIONS

Frequencies: Any frequency from 5 to 1000 MHz. (Standard freq list)
Power Output:
(Guaranteed Minimum Ratings)
+57 dBmV max. per channel when combining 32 channels.
+54 dBmV max. per channel when combining 64 channels.
+51 dBmV max. per channel when combining 128 channels.
Manual Controls:
Carrier (ea. channel)
Modulation (ea. channel)
Output Level Adjust:

On, Off, and adjustable to -15dB.
CW, 100%
Step attenuators simultaneously reduce all channels up to 80 dB in 1 dB steps. (0.1 dB steps are available as an option).
Spurious Content: Cross-modulation, Composite Triple Beat,
Discrete Second Order, and Discrete Third Order
guaranteed better than 100 dB down.
Frequency Stability: 0.003% (carrier and 15.75 KHz internal modulation).
Output Impedance to connector type: 75 Ohm  F, BNC, or N. or 50 Ohm (optional) BNC, N or SMA. 
External Modulation: Input : +5 Volts provides 100% downward modulation.
Input Impedance: Approximately 10K Ohms.
Connector: "F" Female.
Primary Power: 110-120 Volts, 50-60 Hz.
Other voltages and frequencies are available.

 

Product Catalog
Return to Product Catalog
Matrix Home Page
Return to Matrix Test Equipment Home Page